ldap_search

(PHP 4, PHP 5, PHP 7, PHP 8)

ldap_search — Search LDAP tree

说明

ldap_search ( resource|array $ldap , array|string $base , array|string $filter , array $attributes = [] , int $attributes_only = 0 , int $sizelimit = -1 , int $timelimit = -1 , int $deref = LDAP_DEREF_NEVER , array|null $controls = null ) : resource|array|false

Performs the search for a specified filter on the directory with the scope of LDAP_SCOPE_SUBTREE. This is equivalent to searching the entire directory.

From 4.0.5 on it's also possible to do parallel searches. To do this you use an array of link identifiers, rather than a single identifier, as the first argument. If you don't want the same base DN and the same filter for all the searches, you can also use an array of base DNs and/or an array of filters. Those arrays must be of the same size as the link identifier array since the first entries of the arrays are used for one search, the second entries are used for another, and so on. When doing parallel searches an array of search result identifiers is returned, except in case of error, then the entry corresponding to the search will be false. This is very much like the value normally returned, except that a result identifier is always returned when a search was made. There are some rare cases where the normal search returns false while the parallel search returns an identifier.

参数

ldap

An LDAP resource, returned by ldap_connect().

base

The base DN for the directory.

filter

The search filter can be simple or advanced, using boolean operators in the format described in the LDAP documentation (see the » Netscape Directory SDK or » RFC4515 for full information on filters).

attributes

An array of the required attributes, e.g. array("mail", "sn", "cn"). Note that the "dn" is always returned irrespective of which attributes types are requested.

Using this parameter is much more efficient than the default action (which is to return all attributes and their associated values). The use of this parameter should therefore be considered good practice.

attributes_only

Should be set to 1 if only attribute types are wanted. If set to 0 both attributes types and attribute values are fetched which is the default behaviour.

sizelimit

Enables you to limit the count of entries fetched. Setting this to 0 means no limit.

Note:
This parameter can NOT override server-side preset sizelimit. You can set it lower though.

Some directory server hosts will be configured to return no more than a preset number of entries. If this occurs, the server will indicate that it has only returned a partial results set. This also occurs if you use this parameter to limit the count of fetched entries.

timelimit

Sets the number of seconds how long is spend on the search. Setting this to 0 means no limit.

Note:
This parameter can NOT override server-side preset timelimit. You can set it lower though.

deref

Specifies how aliases should be handled during the search. It can be one of the following:

LDAP_DEREF_NEVER - (default) aliases are never dereferenced.
LDAP_DEREF_SEARCHING - aliases should be dereferenced during the search but not when locating the base object of the search.
LDAP_DEREF_FINDING - aliases should be dereferenced when locating the base object but not during the search.
LDAP_DEREF_ALWAYS - aliases should be dereferenced always.

controls

Array of LDAP Controls to send with the request.

返回值

Returns a search result identifier or false on error.

更新日志

版本	说明
8.0.0	`controls` is nullable now; previously, it defaulted to `[]`.
7.3	Support for `controls` added

范例

The example below retrieves the organizational unit, surname, given name and email address for all people in "My Company" where the surname or given name contains the substring $person. This example uses a boolean filter to tell the server to look for information in more than one attribute.

Example #1 LDAP search


<?php
// $ds is a valid link identifier for a directory server

// $person is all or part of a person's name, eg "Jo"

$dn = "o=My Company, c=US";
$filter="(|(sn=$person*)(givenname=$person*))";
$justthese = array("ou", "sn", "givenname", "mail");

$sr=ldap_search($ds, $dn, $filter, $justthese);

$info = ldap_get_entries($ds, $sr);

echo $info["count"]." entries returned\n";
?>

User Contributed Notes

peter dot mlich at volny dot cz 05-Jun-2020 06:57


Example code from my ldap class.



public function query($_filter, $_att, $_ref=2, $count_bool=true)

    {

    $fn     = 'query';

    $config = $this->config;

    $conn   = $this->conn;

    if (!$conn)

        {return $this->errorConnection($fn);}

    ldap_set_option($conn, LDAP_OPT_DEREF, $_ref);    

    $result = ldap_search($conn, $config['baseDn'], $_filter, $_att);    //  or die(ldap_error($conn))

    if ($result===false)

        {

        $this->error("Search error, neexistuje!");

        return false;

        }

    $count = ldap_count_entries($conn, $result);

    if ($count_bool && $count!=1)

        {

        $this->error("Search error, neni unikatni! count=".$count);

        ldap_free_result($result);

        return false;

        }

    $data = ldap_get_entries($conn, $result);

    ldap_free_result($result);

    return $data;

    }



// ---



    $filter = "(&(objectclass=person)(cn=" . $user_name . "))";

    $att    = array(

        'uid', 

        'workforceID',

        'employeeID',

        'givenName',

        'sn',

        'mail'

        );

    $data   = $this->query($filter, $att, 2, true);

steven_bauman at outlook dot com 27-Jan-2020 03:39


Can an example using the new $serverctrls parameter please be added? I have no idea how to use this.

anze dot pratnemer at fe dot uni-lj dot si 28-Jan-2019 08:59


While developing a plugin, I had to search users on LDAP server using ldap_search() command and it was not finding them, but ldapsearch command in unix shell (ubuntu) did.



Problem was few lines above in my code, around ldap_connect(). For server address I input ldap://server.hostname, which turned to be the culprit.



Once I used only server.hostname, without protocol (ldap://), users where found and shown correctly.

mike at remi-designs dot net 13-Jun-2016 10:27


I ran into the problem, that the attribute I was search for had the matching rule of "exactMatch". 



Example:

E-Mail Address is stored in mixed case: [email protected]



LDAP Search will not retrieve any values when the user enters: [email protected]



Solution: instead of comparing user input and attribute value by



<?php

if($data[$i]['mail'][0] == $username) {

    // this will run into nothing

}

?>



use strcasecmp instead:



<?php

if(strcasecmp($data[$i]['mail'][0], $username) == 0) {

    // works

}

jayleno at yahoo dot com 15-May-2013 06:28


<?php

set_time_limit(30);

error_reporting(E_ALL);

ini_set('error_reporting', E_ALL);

ini_set('display_errors',1);



// config

$ldapserver = 'svr.domain.com';

$ldapuser      = 'administrator';  

$ldappass     = 'PASSWORD_HERE';

$ldaptree    = "OU=SBSUsers,OU=Users,OU=MyBusiness,DC=myDomain,DC=local";



// connect 

$ldapconn = ldap_connect($ldapserver) or die("Could not connect to LDAP server.");



if($ldapconn) {

    // binding to ldap server

    $ldapbind = ldap_bind($ldapconn, $ldapuser, $ldappass) or die ("Error trying to bind: ".ldap_error($ldapconn));

    // verify binding

    if ($ldapbind) {

        echo "LDAP bind successful...<br /><br />";

        

        

        $result = ldap_search($ldapconn,$ldaptree, "(cn=*)") or die ("Error in search query: ".ldap_error($ldapconn));

        $data = ldap_get_entries($ldapconn, $result);

        

        // SHOW ALL DATA

        echo '<h1>Dump all data</h1><pre>';

        print_r($data);    

        echo '</pre>';

        

        

        // iterate over array and print data for each entry

        echo '<h1>Show me the users</h1>';

        for ($i=0; $i<$data["count"]; $i++) {

            //echo "dn is: ". $data[$i]["dn"] ."<br />";

            echo "User: ". $data[$i]["cn"][0] ."<br />";

            if(isset($data[$i]["mail"][0])) {

                echo "Email: ". $data[$i]["mail"][0] ."<br /><br />";

            } else {

                echo "Email: None<br /><br />";

            }

        }

        // print number of entries found

        echo "Number of entries found: " . ldap_count_entries($ldapconn, $result);

    } else {

        echo "LDAP bind failed...";

    }



}



// all done? clean up

ldap_close($ldapconn);

?>

Jean-Loup 01-Feb-2012 06:27


Example of parallel search :



<?php

$basedn=array('dmdName=users,dc=foo,dc=fr','dmdName=users,dc=bar,dc=com');  // two basedn

$filter='(&(objectClass=inetOrgPerson)(uid=*))';  // single filter

$attributes=array('dn','uid','sn');



$cnx = ldap_connect('localhost',389); // single connection

ldap_set_option($cnx, LDAP_OPT_PROTOCOL_VERSION, 3);



ldap_bind($cnx,'uid=root,dc=foo,dc=fr','password');  // authentication on two BDB

ldap_bind($cnx,'uid=root,dc=bar,dc=com','password');



$search = ldap_search(array($cnx,$cnx),$basedn,$filter,$attributes);  // search



// result

for($i=0;$i<count($search);$i++){

    print_r(ldap_get_entries($cnx,$search[$i]));

    print "\n";

}

?>

info at acpower dot biz 19-Sep-2011 03:07


I'm a newbie, so I hope this helps some other newbie with a head scratcher...



This code returned an error of 'No Such Object':



<?php



    $search = ldap_search ($ldapcon, "cn=admin,dc=acpower,dc=biz", "(filters)");



?>



I took out the cn, and magic! it works:



<?php



    $search = ldap_search ($ldapcon, "dc=acpower,dc=biz", "(filters)");



?>

nick 01-Sep-2011 11:09


Results from ActiveDirectory may be ordered by objectSid.

We can get all users for each page size by modify filter.



<?php

// ... connect to ldap

$lastsid='';

while (1) {

    $filter = '(objectClass=user)';

    if (strlen($lastsid)) {

        list($v)=array_values(unpack('V',substr($lastsid,24))); // id for user.

        $s = substr($lastsid,0,24).pack('V',1+$v); // next sid.

        $s = preg_replace('/../','\\\\$0',bin2hex($s)); // escape for fiter

        $filter = '(&'.$filter.'(objectSid>='.$s.'))'; // fiter for next entries.

    }

    $res = ldap_search($ldap,$basedn,$filter,array('objectSid','cn'));

    if (!ldap_count_entries($ldap,$res)) {

        break;

    }

    for ($ent=ldap_first_entry($ldap,$res); $ent; $ent=ldap_next_entry($ldap,$ent)) {

        list($lastsid) = ldap_get_values_len($ldap,$ent,'objectSid');

    }

}

?>

Arnold 11-May-2011 01:35


I have been working on a script where I needed to get all the users who were member of a specific MS AD group. Because of PHP bug #42060 ( http://bugs.php.net/bug.php?id=42060 ) I could not get all the users back who were member of the group.


After googling for a day I found an article and a patch but it required that I downloaded the source code for php 5.1.6 or 5.2.10 run the patch and than recompile the code to fix the problem. 


Problem was 


1) I am not a Linux goeroe so I was not very comfortable doing this....


2) I am running the script on a production machine with other code using PHP and did not know what the consequence would bee for that code.


3) I could not update PHP anymore because in newer versions this patch would probably not work any more.





But yesterday I saw the light and wrote some code to get around this problem, maybe other people can use it that have the same problem.





<?PHP


$startFilter        = "(&(memberOf=" .$ADGroup. "))";


$startResults        = ldap_search($ldapconnect, $userBase, $startFilter, $attr);


$countResult        = ldap_count_entries($ldapconnect,$startResults);





IF($countResult == 1000 OR $countResult == 1500)


{


    // loop trough the number 97-122 (ASCII number for the characters a-z)


    For($a=97;$a<=122;$a++)


    {


        // translate the number to a character


        $character            = chr($a); 


        // the new search filter withs returns all users with a last name starting with $character


        $filter            = "(&(sn=$character*)(memberOf=$ADGroup))"; 


        $results        = ldap_search($ldapconnect, $userBase, $filter, $attr);


        $countResult2    = ldap_count_entries($ldapconnect,$results);


            


        // See if the search for all users starting with a specific character still hits the search limit


        // if so than do a new search to find all the users where the last name starts with "aa" and 


        // than with "ab", "ac" etc. etc


        // In the best case we can now find 675.324 users per group when the search limit is 1000


        // ((26 * 999  for the fist character) * 26 for the second character)


        // and 1.013.324 when the search limit is 1500


        If($countResult2 == 1000 or $countResult2 == 1500)


        {


            For($b=97;$b<=122;$b++)


            {


                $character2    = chr($b);


                $filter2    = "(&(sn=$character$character2*)(memberOf=$ADGroup))";


                $results2    = ldap_search($ldapconnect, $userBase, $filter2, $attr);


                $count2        = ldap_count_entries($ldapconnect,$results2);    


                $entries2    = ldap_get_entries($ldapconnect,$results2);                        


                


                // do your thing


            }


        }


        Else


        {


            $entries            = ldap_get_entries($ldapconnect,$results);


            // do your thing


        }


    }


}


else


{


    $entries            = ldap_get_entries($ldapconnect,$startResults);


    // do your thing


}


?>

ben _at_ onshop.co.uk 19-Jan-2010 02:11


Following from my note of 11-Nov-2009 06:56 regarding DN issues when using LDAP instead of the Global Catalog when querying AD, further investigation was showing that although the results were in the packet, I was getting an error instead:



'Search: Can't contact LDAP server' AKA Error 81.



Using more detailed analysis:



ldap_get_option($ds,LDAP_OPT_ERROR_STRING,$error);



echo $error



Displayed:



Referral: ldap://DomainDnsZones.defg.de.bc.ac.uk/ DC=DomainDnsZonesDC=defg,DC=de,DC=abc,DC=ac,DC=uk



By using trial and error, the error went away and results returned when using:



ldap_set_option($ds, LDAP_OPT_PROTOCOL_VERSION, 3);

ben _at_ onshop_co_uk 11-Nov-2009 10:24


Example to illustrate searching more than one DN (multiple DNs):





<?php


$ds=ldap_connect($ldapserver);





$dn[]='OU=ABC,DC=xyz,DC=ac,DC=uk';


$dn[]='OU=DEF,DC=xyz,DC=ac,DC=uk';





$id[] = $ds;


$id[] = $ds;





$filter = 'samaccountname='.$_POST['username'];


 


$result = ldap_search($id,$dn,$filter);





$search = false;





foreach ($result as $value) {


    if(ldap_count_entries($ds,$value)>0){


        $search = $value;


        break;


    }


}





if($search){


    $info = ldap_get_entries($ds, $search);


}else{


    $info = 'No results found';


}


?>

chrisbloom7 at gmail dot com 08-Aug-2007 01:18


Here are a couple of resources for proper construction of filters. 



http://msdn2.microsoft.com/En-US/library/aa746475.aspx



http://technet.microsoft.com/en-us/library/aa996205.aspx



Before finding these I had been stumped for hours on how to do something like "all users starting with "a" except those from OU 'foo'"

Allie 06-Mar-2007 02:38


I just posted on the ldap_bind, but I figured it couldn't hurt here since this was the first place I stopped when trying to figure out my problem.  My error pointed to ldap_search, but specifying the ldap_connect port was the fix.



When you want to search the entire directory for MS AD, you must specify port 3268 in your bind.  This is also true for apache auth_ldap.



 $ldapserver = ldap_connect($server,3268);

27-Jan-2006 03:53


HOWTO list LDAP users.



This CODE list one user from LDAP tree, but I' like list all user from LDAP one ou=Organization



<?php



$ldaprdn = 'cn=user,dc=domain,dc=org'; 

$ldappass = 'password';

$sdn = 'cn=user,ou=group,dc=domain,dc=org';



$ldapconn = ldap_connect("ldap://localhost", 389) 

or die("Not connect: $ldaphost ");



if ($ldapconn) {



// binding to ldap server

$ldapbind = ldap_bind($ldapconn, $ldaprdn, $ldappass);



// verify binding

if ($ldapbind) {

$filter="uid=*"; 

$justthese = array("uid"); 



$sr=ldap_read($ldapconn, $srdn, $filter, $justthese);

$entry = ldap_get_entries($ldapconn, $sr);



} else {

echo "LDAP conn ok...";

}



}



ldap_close($ldapconn);



?> 

<?php

echo $entry[0]["mail"][0] . " mail adress ";

echo $entry[0]["sn"][0] . " Name ";

?>

cruzfern at chuchuwa dot com dot ar 30-Aug-2005 09:14


The internal attributes (like createTimestamp, modifyTimestamp, etc), don't come by default (when the optional parameter attributes is not set). You have to specify it:



<?

$r=ldap_search($ds,$base,$filter,array("createTimestamp"));

?>

fmouse at fmp dot com 01-Mar-2005 10:53


It appears that the Netscape Directory SDK (developer.netscape.com) referenced for LDAP filter information is no longer accepting connections.   The A copy of RFC 2254 which defines the standard for string representations of LDAP filters can be found  at http://www.ietf.org/rfc/rfc2254.txt

openldap at mail dot doris dot cc 11-Feb-2005 07:54


PHP 4.3.10



I was trying to do an ldapsearch without a basedn.  First, I tried with ' ', as suggested above, but it gave me invalid dn syntax error. 



ie: 

$sr=ldap_search($ds, ' ', $filter);

Warning: ldap_search(): Search: Invalid DN syntax in ...



Then I changed it to

$sr=ldap_search($ds, "", $filter);



Which gave me the following error:

Warning: ldap_search(): Search: No such object in ...



With that I then modified my ldap.conf file and commented out the BASE field

#BASE   dc=example, dc=com



Then it worked!



So it looks like if you supply a blank basedn, then it will use your default basedn in ldap.conf.

rsu_friend at yahoo dot com 11-Feb-2005 01:03


I was doing a ldap_search with

$searchbasedn = "miDomainName=" . $_SESSION['selectDomain'] ."," . LDAP_DOMAINBASE;

$filter = "(&(mpsAccountNumber=". $acctNumber .")(objectclass=mpsAccountDetails))";    

$attributes = array("mpsparentchild");



 $sr = ldap_search($ldapconn, $searchbasedn, $filter,$attributes);  



For some reasone this search was failing

but I was able to do successful search only when I gave the search filter as

$filter = "(&(mpsAccountNumber= $acctNumber )(objectclass=mpsAccountDetails))";    



I did not get why the ldap_search was not able to search in the first case.

sema at technion dot ac dot il 04-Sep-2004 10:54


In order to perform the searches on Windows 2003 Server Active Directory you have to set the LDAP_OPT_REFERRALS option to 0:



ldap_set_option($ldap, LDAP_OPT_REFERRALS, 0);



Without this, you will get "Operations error" if you try to search the whole AD schema (using root of the domain as a $base_dn).



As opposed to Windows 2000 Server, where this option was optional and only increased the performance.

chester at the dot underground dot com dot au 20-Nov-2003 01:45


If you are searching active directory and are experiencing lag or time outs, it may be that you are being given ldap referrals from the ldap server. The following code will disable this.



<?

ldap_set_option($connect, LDAP_OPT_REFERRALS, 0);

?>

sembiance at cosmicrealms dot com 16-Nov-2003 06:15


When searching for BINARY data (such as an Active Directory objectGUID) you need to escape each hexadecimal character with a backslash.



The following command line run of ldapsearch shows:

ldapsearch -b "dc=blahblah,dc=com" "(objectGUID=\AE\C3\23\35\F7)"



In PHP, you need to escape the escape for the backslash:

ldap_search($ds,"dc=blahblah,dc=com", "(objectGUID=\\AE\\C3\\23\\35\\F7)");

francis dot tyers at hp dot com 10-Nov-2003 07:53


it seems that all fields must be used in lower case even if they are mixed case in the ldapsearch output.



example:



gidNumber: 1010

homeDirectory: /home/dnt



must be:



echo "gid: " . $info[$i]["gidnumber"][0] . "<br>";

echo "home directory: ". $info[$i]["homedirectory"][0] ."<br>";



not ( $info[$i]["homeDirectory"][0] ) etc.

nicolas at atanis dot net 19-Aug-2003 11:17


Here is a little script that make a complete subtree search ( i know a script above seems do that but it doesnt work fine)

This is my version:



Voila ce que j'ai fait aujourd'hui ...



      $ldap_host = "192.168.0.50";

    $ldap_port = "389";

    $base_dn = "dc=fr";

    $filter = "(cn=*)";

    $ldap_user ="cn=admin,dc=fr";

    $ldap_pass = "hellodelu";

    $connect = ldap_connect( $ldap_host, $ldap_port);

    ldap_set_option($connect, LDAP_OPT_PROTOCOL_VERSION, 3);



    $bind = ldap_bind($connect, $ldap_user, $ldap_pass);

    $read = ldap_search($connect, $base_dn, $filter);

    

    $info = ldap_get_entries($connect, $read); 

    echo $info["count"]." entrees retournees<BR><BR>"; 

    for($ligne = 0; $ligne<$info["count"]; $ligne++)

    {

        for($colonne = 0; $colonne<$info[$ligne]["count"]; $colonne++)

        {

            $data = $info[$ligne][$colonne];

            echo $data.":".$info[$ligne][$data][0]."<BR>";

        }

        echo "<BR>";

    }

ldap_close($connect);



--------

nicolas

me at gavinadams dot org 15-Aug-2003 01:38


Minor clarification on AD LDAP searchs. Small typo in previous example, and does not display multiple values per attribute. Here's the for loop to enumerate all entries, attributes, and values:



$bind = ldap_bind($connect) // asume anon connect or add user/pass

     or exit(">>Could not bind to $ldap_host<<");

$read = ldap_search($connect, $base_dn, $filter)

     or exit(">>Unable to search ldap server<<");

$info = ldap_get_entries($connect, $read);

echo $info["count"]." entries returned<br>";

// $i = entries

// $ii = attributes for entry

// $iii = values per attribute

for ($i = 0; $i<$info["count"]; $i++) {

  for ($ii=0; $ii<$info[$i]["count"]; $ii++){

     $data = $info[$i][$ii];

     for ($iii=0; $iii<$info[$i][$data]["count"]; $iii++) {

       echo $data.":&nbsp;&nbsp;".$info[$i][$data][$iii]."<br>";

     }

  }

echo "<p>"; // separate entries

php @ fccfurn dot com 11-Apr-2003 03:35


To do subtree search from top DN in Active Directory, Make sure you do your ldap_set_option().



<?php

$ldap_host = "pdc.php.net";

$base_dn = "DC=php,DC=net";

$filter = "(cn=Joe User)";

$ldap_user  = "CN=Joe User,OU=Sales,DC=php,DC=net";

$ldap_pass = "pass";

$connect = ldap_connect( $ldap_host, $ldap_port)

         or exit(">>Could not connect to LDAP server<<");

ldap_set_option($connect, LDAP_OPT_PROTOCOL_VERSION, 3);

ldap_set_option($connect, LDAP_OPT_REFERRALS, 0);

$bind = ldap_bind($connect, $ldap_user, $ldap_pass)

      or exit(">>Could not bind to $ldap_host<<");

$read = ldap_search($connect, $base_dn, $filter)

      or exit(">>Unable to search ldap server<<");

$info = ldap_get_entries($connect, $read);

echo $info["count"]." entries returned<p>";

$ii=0;

for ($i=0; $ii<$info[$i]["count"]; $ii++){

    $data = $info[$i][$ii];

    echo $data.":&nbsp;&nbsp;".$info[$i][$data][0]."<br>";

}

ldap_close($connect);

?>

Kamil Kukura <kamk at nexen dot cz> 26-Feb-2003 09:20


When I tried to search with empty base DN on OpenLDAP server which had "" namingContext I got result "no such object". In the log file there was query for dn: dc=example,dc=com (!).

As a workaround, it seems it's enough to feed it with space (' ') as base DN - ldap_search($ds, ' ', '(...filter...)', ...

neumeyed at city dot bloomington dot in dot us 29-Jan-2003 04:50


A previous comment noted: "I've also noticed that the departmentNumber, employeeNumber (and maybe others in inetorgperson.schema) are not returned from a search."



This is incorrect. These attributes are returned, but you must reference them with lowercase names. That is, instead of doing this:



$entries[0]["departmentNumber"][0]



Do this:



$entries[0]["departmentnumber"][0]



This doesn't seem like "correct" behavior to me, but I don't know enough about LDAP to say for sure.

nick dot veitch at futurenet dot co dot 17-Jan-2003 08:59


It might be useful to list here the operators that work:



=         - matches exact value

=*xxx  - matches values ending xxx

=xxx*  - matches values beginning xxx

=*xxx* - matches values containing xxx

=*       - matches all values (if set - NULLS are not returned)



>=xxx  - matches everthing from xxx to end of directory

<=xxx  - matches everything up to xxx in directory



~=xxx      - matches similar entries (not all systems)



Boolean operators for constructing complex search



&(term1)(term2)  - matches term1 AND term2

| (term1)(term2)  - matches term1 OR term2

!(term1)                 - matches NOT term1

&(|(term1)(term2))(!(&(term1)(term2)) - matches XOR term1 term2



some of the more compelx constructions seem to work with varying  degrees of efficiency - sometimes it can be better to filter some of the results with the search and do further filtering in PHP.

emrecio at netscape dot net 30-Sep-2002 08:42


implode(", ",$uentry[0]["rfc822mailalias"]);



doesn't work as expected because "count" is in there... one /must/ use the 'for' loop to cycle through results (discarding "count" element).

jpdalbec at ysu dot edu 09-Sep-2002 07:33


I've found that spaces need to be escaped in search filters ("\20"), at least using the Red Hat PHP 4.1.2 package.  Otherwise no results are returned.

john_taylor_1973 at yahoo dot com 27-Jun-2002 02:26


Try to use ldap_list(), if possible.  It is much faster.  ldap_search searches a scope of LDAP_SCOPE_SUBTREE, but ldap_list searches a scope of just LDAP_SCOPE_ONELEVEL.  This made a big difference on Novell eDirectory 8.6.1, even for a query that only returned 130 objects.  Using an attribute list, the 4th function parameter (of either function), also made queries faster.

31-Aug-2001 07:13


I used the following to retrieve all entries from an ILS (Netmeeting) Server:<p>    $sr=ldap_search($ds, "objectclass=rtperson","(&(cn=%)(objectclass=rtperson))");


<p>Have fun!


<p>Kees

cdaveb at csua dot berkeley dot edu 02-Jan-2001 05:23


FYI, for those doing LDAP searches on Exchange servers, there seems to be some preference in Exchange to disallow searches that aren't initial searches (i.e. only x* will work, not * or *x). I'd been going nuts trying to figure out why I kept getting errors doing * searches.





More info at:


http://www.microsoft.com/Exchange/en/55/help/documents/server/XOG16007.HTM

aa529 at nospamchebucto dot ns dot ca 22-Nov-1999 01:27


Be careful of special characters when generating filters from user input.





*, (, ), \ and NUL should be backslash-escaped. See section 4 of RFC 2254 (I found it here:


http://www.cis.ohio-state.edu/htbin/rfc/rfc2254.html)